Hiking shoes maintenance method

hiking shoes

[This site - shoes and life] how to maintain hiking shoes

1: Brush the dirt on the surface of the shoe with a soft brush. If it is dirty, wash it in clean water.

2: Use a small wooden stick to remove the pebbles and other debris from the sole and wipe it.

3: Loosen the shoelace completely, open the tongue, remove the insole, stuff it into the newspaper, and let it dry naturally in a cool, ventilated place.

4: After the shoe is completely dry, remove the used paper, put back the clean insole, and then put in new paper. This is to ensure that the shoes

Shape will not change. Then put it into the shoe box and keep it in a ventilated place.

5: After the shoe has passed through for a period of time, the water repellency of the shoe surface will decrease or disappear. At this time, professional care agents can be used to restore the water repellent function of the shoes.

Precautions in maintenance

1: Do not use a hard brush, this will easily lead to damage to the upper material.

2: Do not clean the outsole of the shoe with hard metal so as not to damage the sole rubber.

3: The stains that cannot be washed off the uppers, do not use detergents such as soap and washing powder. Please select a professional care agent for cleaning.

4: After the shoes are wet, do not use fire or exposure to sunlight, this will reduce the life of the shoes, and will not wear serious.

5: Be sure to wait until the shoes are completely dry before placing them in the shoe box.

6: When cleaning leather shoes, you should clean the fine nylon sand, otherwise it will wear waterproof breathable film.

7: Minimize the number of water cleanings.

Correct knowledge of shoes

1: Please choose a pair of matching shoes. The basic requirement for hiking shoes is to put on thick socks and you can reach one finger behind the feet.

2: According to their actual use of the correct selection of the right shoes, so as not to bring inconvenience to your outdoor activities.

3: The elasticity of shoelaces should be moderate. Too loose can easily cause falls and sprains, and too tight affects the blood circulation of the foot.

4: Please trim your toenails. Too long nails can damage the waterproof breathable film of the shoes, causing water seepage.

5: Choose functional socks and waterproof shoes with a better effect, especially in the cold winter.

  • · The old shoes at home are like this to transform big spikes
  • · Old shoes don't stupidly throw away so that the shoes "open"
  • Put a physical insurance on your shoes
  • · How to clean the matte surface of the shoes?
  • · Breathable, antibacterial, deodorizing socks with it to avoid off shoes
  • ·Sports shoes's little tail actually has these 3 functions you certainly don't
  • ·High-heeled shoes audio sound? 4 coups to ease you learn a few
  • ·How to choose shoes during pregnancy? Flat shoes are not safe
  • What should I do if my shoes become moldy
  • ·Wearing these shoes in the summer will hurt you
  • The raw material of mink coat is called raw leather.
    The original skin is divided into two parts: skin and wool. The hair surface consists of two parts: needle hair and bottom wool. The needle hair is long, rigid, straight and bright. The undercoat is short and soft, and has no light. When buying mink coat, besides the satisfactory style and fine workmanship, it is very important to check the quality of the raw leather. We can refer to the following steps:
    (1) Hope: whether the hair bar is straight, whether the hair is neat, whether the color is symmetrical, and whether the luster is bright. The luster is poor and the hairs are messy. A concave spot can be found on the surface of the wool, and the plush can be removed by hand to check whether there is a light plate. If it is a beautiful dog's coat, carefully check whether the tip of the fur is scorched; for a cat's coat, the focus is on the clarity of the dots; if it is a Hu sheepskin coat, it is better to have short fur and firm patterns. You should also use your hands to gently push the hair along the wool surface to see if there is any hair loss. Next, we should pay attention to whether there are cracks in the joints. It
    (2) touch: rub the skin with hand to check whether it is soft or not. If the rubbing sounds, or feel stiff, that leather tanning penetration is poor, on the mink coat fastness and wearing comfort are affected. A concave spot can be found on the surface of the wool, and the plush can be removed by hand to check whether there is a light plate. You should also use your hands to gently push the hair along the wool surface to see if there is any hair loss. Next, we should pay attention to whether there are cracks in the joints. It

    (3) Blow: Blow on the fur with your mouth to see if the fur is loose, flexible, flat, knotted or oily.

    (4) color: require uniform dyeing, luster, loose and flexible, hair line is consistent, smooth, with white paper wipe hair several times without hair loss, no dust; no oil, no odor, no hair removal, no needles, with the hand to push the hair quilt can not shed. It

    (5) smell: smell the fur and make it smell good. If the fur is not properly treated and the fat and meat are not cleaned up, it will leave a foul smell, and will appear in the preservation of fur moth, moldy. It
    (6) weigh: the weight of clothing, the same size of leather, and the lighter weight of clothing.

     

    New Design Fur Coat

    New Design Fur Coat,Eco Fur Coat,Real Animal Fur Coat,Winter Fur Coat

    ShiJiaZhuang RunZest Trading Co., Ltd , https://www.fineleatherfur.com

    Posted on